Ddosify - High-performance Load Testing Tool
2021-11-09 20:30:00 Author: www.kitploit.com(查看原文) 阅读量:46 收藏

Features

Protocol Agnostic - Currently supporting HTTP, HTTPS, HTTP/2. Other protocols are on the way.

Scenario-Based - Create your flow in a JSON file. Without a line of code!

Different Load Types - Test your system's limits across different load types.

Installation

ddosify is available via Docker, Homebrew Tap, and downloadable pre-compiled binaries from the releases page for macOS, Linux and Windows.

Docker

docker run -it --rm ddosify/ddosify

Homebrew Tap (macOS and Linux)

brew install ddosify/tap/ddosify

apk, deb, rpm packages

# For Redhat based (Fedora, CentOS, RHEL, etc.)
rpm -i https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.rpm

# For Debian based (Ubuntu, Linux Mint, etc.)
wget https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.deb
dpkg -i ddosify_amd64.deb

# For Alpine
wget https://github.com/ddosify/ddosify/releases/download/v0.1.1/ddosify_amd64.apk
apk add --allow-untrusted ddosify_amd64.apk

Using the convenience script (macOS and Linux)

  • The script requires root or sudo privileges to move ddosify binary to /usr/local/bin.
  • The script attempts to detect your operating system (macOS or Linux) and architecture (arm64, x86, amd64) to download the appropriate binary from the releases page.
  • By default, the script installs the latest version of ddosify.
  • If you have problems, check common issues
  • Required packages: curl and sudo
curl -sSfL https://raw.githubusercontent.com/ddosify/ddosify/master/scripts/install.sh | sh

Go install from source (macOS, Linux, Windows)

Easy Start

This section aims to show you how to use Ddosify without deep dive into its details easily.


  1. Simple load test
     ddosify -t target_site.com

    The above command runs a load test with the default value that is 100 requests in 10 seconds.


  2. Using some of the features
     ddosify -t target_site.com -n 1000 -d 20 -p HTTPS -m PUT -T 7 -P http://proxy_server.com:80

    Ddosify sends a total of 1000 PUT requests to https://target_site.com over proxy http://proxy_server.com:80 in 20 seconds with a timeout of 7 seconds per request.


  3. Scenario based load test
     ddosify -config config_examples/config.json

    Ddosify first sends HTTP/2 POST request to https://test_site1.com/endpoint_1 using basic auth credentials test_user:12345 over proxy http://proxy_host.com:proxy_port and with a timeout of 3 seconds. Once the response is received, HTTPS GET request will be sent to https://test_site1.com/endpoint_2 along with the payload included in config_examples/payload.txt file with a timeout of 2 seconds. This flow will be repeated 20 times in 5 seconds and response will be written to stdout.

Details

You can configure your load test by the CLI options or a config file. Config file supports more features than the CLI. For example, you can't create a scenario-based load test with CLI options.

CLI Flags

Flag

Description Type Default Required?
-t Target website URL. Example: https://ddosify.com string - Yes
-n Total request count int 100 No
-d Test duration in seconds. int 10 No
-p Protocol of the request. Supported protocols are HTTP, HTTPS. HTTP/2 support is only available by using a config file as described. More protocols will be added. string HTTPS No
-m Request method. Available methods for HTTP(s) are GET, POST, PUT, DELETE, UPDATE, PATCH string GET No
-b The payload of the network packet. AKA body for the HTTP. string - No
-a Basic authentication. Usage: -a username:password string - No
-h Headers of the request. You can provide multiple headers with multiple -h flag. string - No
-T Timeout of the request in seconds. int 5 No
-P Proxy address as host:port. -P http://user:[email protected]_host.com:port' string - No
-o Test result output destination. Other output types will be added. string stdout No
-l Type of the load test. Ddosify supports 3 load types. string linear No
-config Config File of the load test. string - No
-version Prints version, git commit, built date (utc), go information and quit - - No

Load Types

Linear

ddosify -t target_site.com -l linear

Result:

Note: If the request count is too low for the given duration, the test might be finished earlier than you expect.

Incremental

ddosify -t target_site.com -l incremental

Result:

Waved

ddosify -t target_site.com -l waved

Result:

Config File

Config file lets you use all capabilities of Ddosify.

The features you can use by config file;

  • Scenario creation
  • Payload from a file
  • Extra connection configuration, like keep-alive enable/disable logic
  • HTTP2 support

Usage;

ddosify -config <json_config_path>

There is an example config file at config_examples/config.json. This file contains all of the parameters you can use. Details of each parameter;

  • request_count optional

    This is the equivalent of the -n flag. The difference is that if you have multiple steps in your scenario, this value represents the iteration count of the steps.

  • load_type optional

    This is the equivalent of the -l flag.

  • duration optional

    This is the equivalent of the -d flag.

  • proxy optional

    This is the equivalent of the -P flag.

  • output optional

    This is the equivalent of the -o flag.

  • steps mandatory

    This parameter lets you create your scenario. Ddosify runs the provided steps, respectively. For the given example file step id: 2 will be executed immediately after the response of step id: 1 is received. The order of the execution is the same as the order of the steps in the config file.

    Details of each parameter for a step;

    • id mandatory

      Each step must have a unique integer id.

    • url mandatory

      This is the equivalent of the -t flag.

    • protocol optional

      This is the equivalent of the -p flag.

    • method optional

      This is the equivalent of the -m flag.

    • headers optional

      List of headers with key:value format.

    • payload optional

      This is the equivalent of the -b flag.

    • payload_file optional

      If you need a long payload, we suggest using this parameter instead of payload.

    • auth optional

      Basic authentication.

      "auth": {
      "username": "test_user",
      "password": "12345"
      }
    • others optional

      This parameter accepts dynamic key: value pairs to configure connection details of the protocol in use.

      "others": {
      "keep-alive": true, // Default false
      "disable-compression": false, // Default true
      "h2": true, // Enables HTTP/2. Default false.
      "disable-redirect": true // Default false
      }

Common Issues

macOS Security Issue

"ddosify" can’t be opened because Apple cannot check it for malicious software.
  • Open /usr/local/bin
  • Right click ddosify and select Open
  • Select Open
  • Close the opened terminal

Communication

You can join our Discord Server for issues, feature requests, feedbacks or anything else.

More

This repository includes the single-node version of the Ddosify Loader. Ddosify Cloud will be available soon. It will support multi-location based distributed load testing and more features.

Join the waitlist: https://ddosify.com

License

Licensed under the AGPLv3: https://www.gnu.org/licenses/agpl-3.0.html

Ddosify - High-performance Load Testing Tool Ddosify - High-performance Load Testing Tool Reviewed by Zion3R on 8:30 AM Rating: 5


文章来源: http://www.kitploit.com/2021/11/ddosify-high-performance-load-testing.html
如有侵权请联系:admin#unsafe.sh