好的，我现在需要帮用户总结这篇文章的内容。用户的要求是用中文总结，控制在100字以内，不需要特定的开头，直接写描述即可。 首先，我快速浏览文章内容。文章主要讲TP-Link的Omada网关设备存在两个命令注入漏洞，分别是CVE-2025-6542和CVE-2025-6541。前者严重性评分9.3，远程无需认证就能利用；后者评分8.6，需要登录管理界面才能利用。这些漏洞可能导致设备被完全控制、数据窃取等风险。影响了13款设备的不同固件版本，厂商已经发布了更新修复。 接下来，我需要提取关键信息：漏洞名称、影响范围、严重性评分、攻击方式、风险后果以及修复措施。 然后，我要把这些信息浓缩到100字以内。注意用词简洁明了，避免冗长。 最后，检查是否符合用户的要求：中文、无特定开头、字数控制。 </think> TP-Link警告Omada网关设备存在两个命令注入漏洞（CVE-2025-6542和CVE-2025-6541），可能导致设备被完全控制或数据泄露。其中CVE-2025-6542无需认证即可远程利用，而CVE-2025-6541需登录管理界面。厂商已发布固件更新修复漏洞。 2025-10-21 21:15:16 Author: www.bleepingcomputer.com(查看原文) 阅读量:8 收藏
TP-Link is warning of two command injection vulnerabilities in Omada gateway devices that could be exploited to execute arbitrary OS commands.
Omada gateways are marketed as full-stack solutions (router, firewall, VPN gateway) for small to medium businesses, and are constantly increasing in popularity.
Although the two security issues lead to the same result when triggered, only one of them, identified as CVE-2025-6542 with a critical severity rating of 9.3, can be exploited by a remote attacker without authentication.
The second flaw is tracked as CVE-2025-6541 and received a lower severity score of 8.6. However, it can be exploited only if the attacker can log into the web management interface.
“An arbitrary OS command may be executed on Omada gateways by the user who can log in to the web management interface or by a remote unauthenticated attacker,” reads TP-Link's advisory.
“Attackers may execute arbitrary commands on the device’s underlying operating system,” the company adds.
The risk the two vulnerabilities poses is significant as it can lead to a full compromise, data theft, lateral movement, and persistence.
CVE-2025-6541 and CVE-2025-6542 impact 13 Omada gateway models in the firmware versions listed below:
|
Affected Product Model |
Affected Version |
Fixed Version |
|
ER8411 |
< 1.3.3 Build 20251013 Rel.44647 |
>= 1.3.3 Build 20251013 Rel.44647 |
|
ER7412-M2 |
< 1.1.0 Build 20251015 Rel.63594 |
>= 1.1.0 Build 20251015 Rel.63594 |
|
ER707-M2 |
< 1.3.1 Build 20251009 Rel.67687 |
>= 1.3.1 Build 20251009 Rel.67687 |
|
ER7206 |
< 2.2.2 Build 20250724 Rel.11109 |
>= 2.2.2 Build 20250724 Rel.11109 |
|
ER605 |
< 2.3.1 Build 20251015 Rel.78291 |
>= 2.3.1 Build 20251015 Rel.78291 |
|
ER706W |
< 1.2.1 Build 20250821 Rel.80909 |
>= 1.2.1 Build 20250821 Rel.80909 |
|
ER706W-4G |
< 1.2.1 Build 20250821 Rel.82492 |
>= 1.2.1 Build 20250821 Rel.82492 |
|
ER7212PC |
< 2.1.3 Build 20251016 Rel.82571 |
>= 2.1.3 Build 20251016 Rel.82571 |
|
G36 |
< 1.1.4 Build 20251015 Rel.84206 |
>= 1.1.4 Build 20251015 Rel.84206 |
|
G611 |
< 1.2.2 Build 20251017 Rel.45512 |
>= 1.2.2 Build 20251017 Rel.45512 |
|
FR365 |
< 1.1.10 Build 20250626 Rel.81746 |
>= 1.1.10 Build 20250626 Rel.81746 |
|
FR205 |
< 1.0.3 Build 20251016 Rel.61376 |
>= 1.0.3 Build 20251016 Rel.61376 |
|
FR307-M2 |
< 1.2.5 Build 20251015 Rel.76743 |
>= 1.2.5 Build 20251015 Rel.76743 |
The vendor has released firmware updates that address the two problems and strongly recommends that users with impacted devices to apply the fixes and check the configurations after the upgrade to make sure that all settings remain as intended.
In a separate bulletin, TP-Link warned of two other severe flaws that could allow authenticated command injection and root access under certain conditions.
The first is CVE-2025-8750 (CVSS: 9.3), a command injection flaw that can be exploited by attackers holding admin passwords to access the Omada web portal.
The other one is CVE-2025-7851 (CVSS: 8.7), which could enable an attacker to obtain shell access with root privileges on the underlying OS, restricted to Omada’s privileges.
CVE-2025-7850 and CVE-2025-7851 impact all of the Omada gateway models listed in the table above. It is worth noting that the latest firmware release addresses all four vulnerabilities.
如有侵权请联系:admin#unsafe.sh