2024-6-4 05:25:52 Author: danielmiessler.com(查看原文) 阅读量:6 收藏
I think I’ve finally figured out what’s up with podcast audio. At least in terms of:
What makes a good microphone
What makes a good sound signature in a podcast
Audio production
Etc.
So what I’m going to do is just blast you with what I at least think I know at this point.
My audio journey
I’ve been studying this stuff in-depth since around 2019. And during the pandemic I went hard on it. Like full audiophile.
I learned the science around what audiophiles were on about. I learned about what makes good sound in music. I built my house in 2020 and put in a pretty sick sound system.
But a lot of my focus was on finding the perfect sound for a podcast. Like how I wanted to sound in audio, and what it takes to make that happen.
Previous posts
This post basically updates and replaces a lot of what I talked about in those, although much of what I said before still holds.
The basics, in no particular order
First I’ll hit you with the science / reality stuff and then I’ll give you some samples.
Dynamic microphones
Dynamic mics have less range but are more forgiving of noises.
The Shure SM7b is the most famous dynamic mic right now, and pretty much every major podcaster uses it.
The SM7b produces a pleasing, rounded, deep, but a little bit dead sound. It makes you sound authoritative.
Condenser microphones
Condenser mics are extremely clear but very noisy because they pick up everything.
Condensers capture mouth noises, any room sounds, and pretty much anything VERY clearly and accurately.
They also pull in much more sound range, meaning way up towards 20,000 hz and beyond, which makes them sound less dead and more realistic.
Examples include the Yeti series on the low end (less than $100), and the Neumann U87ai on the high end ($4,500).
Common mistakes with post-production
Lots of podcasters—especially men—like a super-deep sound because they think it makes them sound cool and authoritative.
Unfortunately, all that extra bass sounds artificial over time and is actually quite fatiguing to listen to.
It’s also really hard to listen to in a car, where lots of people listen to podcasts, because the low rumbling mixes with the road noise.
Signature sounds
The NPR sound is low bass and high clarity largely because they use Neumann U87ai mics, and they like that clear sound.
The sounds of famous podcasters
Sam Harris uses an SM7b (or the USB version) and keeps it pretty clean with not too much post-production. He’s had the same signature for years now. It’s basically mid-range, with some decent bass but not too much, extremely clean in terms of mouth noises and background noises, and a bit sterile. It works well for him because it’s like an understated clean sound.
Chris Williamson is a super-popular podcaster now and he also uses SM7b’s, but he mixes his own mic with a lot of post-production to have lots more highs and “ambience” added in. Which basically means character. If you listen to his podcast his voice always has a strong combination of deep but also bright. Really good production, and I’d be surprised if he or his team ever shared his post-production chain. I bet he considers it a trade secret.
Joe Rogan also uses the SM7b and he has a sound profile that’s very neutral and natural. I’m not sure if Jamie enhances the highs or not, but the overall mix is very clean and clear.
Lex Fridman is also on an SM7b and he has a pretty neutral sound with some highs possibly added in.
I believe Scott Galloway is on SM7b’s as well, and he definitely has some added in highs after the fact. His sound is a lot more natural and bright than something like Joe’s.
Tips for improving your audio
The general rule for audio is to do as much as possible at recording time and as little as possible in post-production. That means 1) room treatment, and generally having a quiet room if possible.
Removing echo is a superpower for making audio sound amazing. Definitely do this if you want to sound professional. I have been using DeVerberate for years and love it.
If you’re going to use the SM7b, my recommendation is to use the it with bass rolled off and the highs raised on the microphone itself. This will still have plenty of bass but it’ll make the mic sound much more natural and vibrant vs. sterile and dead.
Do as little post processing as possible.
Treat your room if possible.
Make sure to remove echo, even if you don’t think you have much.
Additional trivia / tricks
Loudness is deceptive and an enhancer. Basically, being louder sounds better to most ears, but be careful with how you achieve it.
Be careful with loudness without compression because you can start clipping (cutting out from being too loud).
Be careful with too much compresssion because it can remove the natural sound and make it sound more sterile and dead.
My current setup
My current setup is quite clean and simple. I’ve moved away from my Neumann U87ai because it picks up too much noise. Most importantly my mouth noises, shaking feet, the sound of my clothing rubbing, etc.
SM7b
Fully treated studio / office where I work
Bass rolled off (on the mic hardware)
Highs enhanced (on the mic hardware)
RODECASTER PRO for my mixer
The only mod on my RODECASTER PRO is a noise gate
Post-production when I record in Hindenburg and not OBS:
DeVerberate for echo removal
Nectar 4 for noise gate
Nectar 4 for bass cutoff below 80
Nectar 4 for a slight lift in mid bass
Nectar 4 cutout at around 1500 hz to remove bad mids
Nectar 4 minor high shelf added after around 7000
Here’s what that sounds like
// My latest mic sound
Summary
You should probably use a dynamic mic unless you’re a trained studio speaker.
You should probably use a dynamic mic if you don’t have a treated room.
Resist the urge to add bass. It only sounds cool for a moment, and then is bad for listeners.
If you have any doubts, go with the SM7b. It’s a workhorse. And if you can’t afford one yet (around $400), get the little brother USB version.
If you do get an SM7b you’ll need an audio interface to put it in, and/or a signal booster.
Focus on getting a clean, natural sound from your voice, not making it sound deep or booming. That is what will cut through the listener’s environment and make it to them the best.
Do as much as you can during recording, and try to modify it as little as possible in post.
Finally, don’t stress it too much. The content matters more anyway.
如有侵权请联系:admin#unsafe.sh